 |
CB Series Economic Stainless Steel Enclosure |
• Brushed stainless steel, grade 1.4404 (316L) or grade 1.4301 (304)
• 18 sizes (with 2 standard depths)
• 1 flange plate or none
• IP66 protection
• Internationally approved
• Dimensions of the enclosure could be customized |
 |
Explosion Prove Sheet Steel Enclosure |
• Available in 12 sizes and 3 standard depths
• Equipped with up to 4 gland plates
• The gasket is protected against compression
• Cover lock outside the sealed zone
• Improved temperature performance
• IP66/IP67 protection
• Earthing bolt welded in the cover and base of the enclosure
• Welded mounting feet |
 |
STB series Explosion Prove Stainless Steel Enclosure |
• A standard seal that is resistant to high temperatures - extended temperature range of -50°C to +100°C (+120°C on request)
• Approved according to ATEX, IECEx, cULus, Lloyds Register, Germanischer Lloyd, GOST
• Flexible options when mounting the internal rail
• IP66 protection
• The seal is protected against compression; this ensures that a permanent and secure seal is maintained.
• Earth stud in housing cover and bottom section
• Delivered with welded-on mounting to ensure an optimal housing installation |
 |
Diecast Aluminium Enclosure |
• Available in two different surfaces: natural and powder-coated (RAL 7001)
• Available normally with silicone or chloroprene gasket seal
• A uniform Torx-slotted screw head is used for over 19 different housing sizes
• Mounting holes not within the sealed area
• High degree of protection: IP66, IP67 and IP68
• Impact resistance of up to 10 Joules
• The housings are certified by ATEX, GOST, GOST Ex, cULus, Russian Maritime Register, German Lloyd, as well as the empty housing standard
• Alloy is resistant to salt water
• Standardised distributor housings with threaded holes and a variety of terminal configurations |
 |
Large Polyester Enclosure |
Polyester housings The glass fibre-reinforced polyester housings of the Klippon POK series represent a high-quality, inexpensive solution for electric connections.
• 17 sizes
• Cover with stainless steel screws
• Fixing holes outside the sealed area
• Thread for fitting to terminal rails and mounting plates
• Weidmüller can manufacture and supply this enclosure to match customer specifications, fitted with all necessary terminals and cable glands.
Polyester housings The housings of the TBF series are made of extremely tough glass fibre-reinforced polyester.
• 9 sizes in 2 versions
• Cover with nylon screws
• Fixing holes outside the sealed area
• Thread for fitting to terminal rails and mounting plates
• Comprehensive accessories Weidmüller can manufacture and supply this housing to match customer specifications, fitted with all necessary terminals and cable glands.
|
 |
Small Polycarbonate Enclosures |
Small and medium-sized polycarbonate housings The polycarbonate housings of the MPC series are ideal for building into electrical, electromechanical and pneumatic devices as well as PCBs.
• 9 sizes in 2 versions
• Grey or transparent cover
• Cover with lead-seal holes
• Mounting holes outside the seal area - receptacle threads for rail mounting, mounting plates and circuit board
• Comprehensive accessories Weidmüller can manufacture and supply the housing to match customer specifications, fitted with all necessary terminals and cable glands.
Medium-sized polycarbonate housings The FPC series of housings is the next generation of the MPC series. Exhibiting the same material properties, the FPC series has an even wider range of accessories and hence extends the number of potential applications.
• 6 sizes in 2 versions
• Grey or transparent cover
• Cover with lead-seal holes
• Fixing holes outside the sealed area
• Thread for fitting to terminal rails, mounting plates and PCBs
• Comprehensive accessories Weidmüller can manufacture and supply the housings to match customer specifications, fitted with all necessary terminals and cable glands.
|
|
|
